Part Number Hot Search : 
4ACT1 C244D M400071 MJE305 036RSP M20BL2D AN302 ANALOG
Product Description
Full Text Search
 

To Download MSR15D Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Safety Relays
Monitoring Safety Relays with Delayed Outputs
Minotaur MSR15D Specifications
Standards EN 954-1, ISO13849-1, IEC/EN 60204-1, IEC 60947-5-1, ANSI B11.19, AS4024.1 Cat. 3 per EN 954-1 (ISO 13849-1) C-Tick, CE marked for all applicable directives, cULus & TUV 24V AC/DC <4VA 2 N.C. 0.5s 500 Automatic/Manual 2 N.O. Safety; 1 N.C. Auxiliary B300, AC-15 4A/250V AC, 4A/125V AC P300, DC-13; 2A/24V DC 4A 500mA time lag 5A quick acting 10mA/10V 90ms Red = Power On Green = K1 Closed Green = K2 Closed 2500V C in accordance with VDE 0110 3 -10C to +55C (+14F to +131F) 90% RH IP40, (NEMA 1), DIN 0470 IP20, DIN 0470 1 x 2.5mm2 (14AWG) stranded, 1 x 4mm2 (12AWG) solid 1Nm (8.85lbin) Red Polycarbonate 35mm DIN rail 230g (.51lbs) 100,000 operations 500,000 operations 1,000,000 operations 2,000,000 operations 2,000,000 operations 0.75mm (0.30in) peak, 10-55Hz 30g, 11ms half sine
Category Approvals Power Supply Power Consumption Safety Inputs Input Simultaneity Maximum Input Resistance Reset Outputs
Description
The MSR15D has 2 N.C. dual channel input for use with gate interlocks and emergency stop buttons in higher risk applications. The MSR15D has output monitoring that can accommodate an automatic/manual reset. Automatic/manual reset can use a jumper or can be used to check operation of the contacts. The MSR15D has 3 N.O. safety outputs, 1 N.C. auxiliary output and 1 N.O. delayed safety output. The delay is set by an internal potentiometer. The safety outputs have independent and redundant internal contacts to help ensure the safety function. The auxiliary contact is a nonsafety output intended to provide an external signal about the status of the safety outputs.
Output Utilization per IEC 60947-5-1 (Inductive) Thermal Current (non switching) Fuses Input (internal, replace.) Output (external) Min. Switched Current/Voltage Maximum Dropout Time Indication LEDs Impulse Withstand Voltage Installation Group Pollution Degree Operating Temperature Humidity Enclosure Protection Terminal Protection Conductor Size Torque Settings--terminal screws Case Material Mounting Weight Electrical Life 220V AC/4A/880VA cos=0.35 220V AC/1.7A/375VA cos=0.6 30V DC/2A/60W 10V DC/0.01A/0.1W Mechanical Life Vibration Shock
Features
* * * * * * * * Safety category 3 Stop category 0 and 1 2 N.C. dual channel input 2 N.O. safety outputs 1 N.O. safety delayed output 1 N.C. auxiliary output Automatic/manual reset 45mm wide housing
The safety function is ensured by the Minotaur
See Output Ratings on page 1-29 for details. Consult factory for ratings not shown.
Switch circuit MSR15D monitors for any single fault that may cause a danger.
MSR15D monitors itself for any internal fault.
Contactors: Provides contactor monitoring if two or more contactors are used in series.
4-44
Safety Relays
Monitoring Safety Relays with Delayed Outputs
Minotaur MSR15D Product Selection
Inputs 2 N.C. 1 N.O. Delayed Safety Outputs 2 N.O. Instantaneous 1 N.C. 24V AC/DC Auxiliary Outputs Power Supply Delay Timing 0.1 to 10 seconds 1 to 35 seconds Catalogue Number 440R-M23048 440R-M23057
Accessories
Description 500mA Fuse Page Number 14-6 Catalogue Number 440R-A31562
Dimensions--mm (inches) Block Diagram
118 (4.65) 45.5 (1.79)
A1 F1 K2 K1 ~ 24VDC K3 K2 K3 K1 K1 K2 K3 K4 K5 Timer K3 K2 K1 VR1 K2 K1 K5 K1 K4 K5 K4 K2 K3 A2 X1 X2 S13 S14 D13 13 23 31
73 (2.87)
K4 K5
35mm DIN Rail Mounting
S24 S23 D14 14 24 32
Typical Wiring Diagrams
24V DC
L1 L2 L3
Reset Guard Closed & Unlocked
A1 42 41 54 53 S13 S23 A1 13 23 31 D13 X1 K2
A2
12 22
34
MSR15D Stop
K2
TLS2-GD2
11 21 33 S14 S24 A2 14 24 32 D14 X2 K1 K2
M
Aux
Ground
Dual Channel Guardlocking Safety Gate, Delayed Gate Release, Manual Reset, Dual Channel Output, Monitored Output Application Details
Adjustment of delay time for output D13-D14
Maximum
Minimum
500 mAT Fuse replacement
4-45


▲Up To Search▲   

 
Price & Availability of MSR15D

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X